|
| 貨號 | |
| 品牌 | ORAPI |
| 是否危險化學品 | 否 |
| 型號 | ORAPI POWDER OR 05 |
| 產品等級 | 其他 |
| CAS編號 | |
| 純度 | 45% |
| 別名 | ORAPI POWDER OR 05 |
| 密度 | 1.3g/cm3 |
| 產地/廠商 |
Anti-wear treatment :
- Facilitates running-in, reduces friction forces, prevents seizing, prolongs the life of parts.
- The film formed is not excessively thick and therefore there is no mechanical slack.
Protection against contact rust and friction :
- Applying OR 05 considerably delays the appearance of the "fretting" phenomenon.
- Bearing rings, cone assemblies, oscillating joints etc.
Does not attract dust because it creates a dry film.
Keeps the same aspect from -200°C to +450°C unlike oil and grease which harden in the cold and liquefy in the heat.
Applications :
- Compressed gas cylinders and valves, including oxygen, as well as mechanisms, pressure reducing valves and pipe connections.
- Static or dynamic mechanical parts in use incompatible with liquid or plastic lubricants.
- Automatic weapon mechanisms, guns and ammunition.
- Mechanisms operating in a dusty environment, threaded or non-threaded assemblies to facilitate installation and subsequent dismantling, eliminating contact rust.
- It should be noted that without air, the product remains effective even if the parts are heated to a temperature of around 600°C.
- Cold and other fittings to facilitate assembly and reduce exertion.
- Various mechanisms subject to significant variations in temperature, making it almost impossible to use liquid or plastic lubricants.
- Dry lubrication of rotating or sliding seals made from synthetic materials, including pneumatic control systems not lubricated by traditional processes.
- Cryogenic lubrication.
- Cold forming : forging, wire drawing, etc.
- Can be used as additive in oil, grease and polymers to improve their friction coefficient.
純度超過98%的微細二硫化鉬粉末，在組裝前批量包裝用于所有金屬或塑料組件的預處理。
抗磨處理:
-方便磨合，減少摩擦力，防止卡死，延長零件壽命。
-形成的薄膜不會太厚，因此沒有機械松弛。
防止接觸生銹和摩擦:
-應用OR 05大大延遲了“微動”現象的出現。
-軸承套圈、圓錐組件、擺動接頭等。
不吸引灰塵，因為它創造了一個干燥的膜。
在-200°C到+450°C之間保持相同的外觀，不像油和潤滑脂在冷時變硬，在熱時液化。
應用程序:
-壓縮氣體鋼瓶和閥門，包括氧氣，以及機構，減壓閥和管道連接。
-使用中的靜態或動態機械部件與液體或塑料潤滑劑不兼容。
-自動武器裝置、槍支和彈藥。
-在塵土飛揚的環境中工作的機構，螺紋或非螺紋組件，以方便安裝和隨后的拆卸，消除接觸生銹。
-需要注意的是，在沒有空氣的情況下，即使零件被加熱到600°C左右的溫度，產品仍然有效。
-冷卻和其他配件，以方便組裝和減少消耗。
-各種機制受溫度的顯著變化影響，幾乎不可能使用液體或塑料潤滑劑。
-合成材料制成的旋轉或滑動密封的干式潤滑，包括不通過傳統工藝潤滑的氣動控制系統。
-低溫潤滑。
-冷成形:鍛壓、拉絲等
-可作為潤滑油、潤滑脂和聚合物的添加劑，以提高其摩擦系數。
