Santovac 5GB Ultra High Vacuum Grease
- 發布日期： 2018-05-23
- 更新日期： 2026-03-04
產品詳請
| 貨號 |
|
| 品牌 |
|
| 是否危險化學品 |
|
| 型號 |
|
| 產品等級 |
優級品
|
| CAS編號 |
|
| 純度 |
95%
|
| 別名 |
Santovac 5GB
|
| 密度 |
1.3g/cm3
|
| 產地/廠商 |
Santovac 5GB
|
Santovac 5GB is a non-melting, ultra-high vacuum grease with exceptional resistance to high temperatures, oxidation, radiation, chemical attack and moisture. The base fluid is Santovac 5 Polyphenyl Ether, which has been used successfully for many years in numerous vacuum applications. This unique grease is intended for applications where exposure to these conditions is likely, especially where silicones and halogens are to be avoided. The resistance to radiation breakdown puts Santovac 5GB grease in a class of its own.
Santovac 5GB Grease has an extremely high surface tension of 50 dynes/cm and as a result, it tends to not want to leave the site where it was originally applied and migrate, a problem with many other greases. That is why Santovac 5GB Grease is known as the best of the "non-migrating" greases. And in addition to this non-migrating property, Santovac 5GB grease will usually last significantly longer since the film that is applied will maintain its thickness at the point of application.
Santovac 5GB vacuum grease is especially advantageous for use on "O" rings being used in systems that are using a diffusion pump charged with Santovac 5, as a diffusion pump fluid, such as in many older electron microscopes, both SEMs and TEMs. The same would be true for many of the world's installed base of GC Mass Specs. This is going to result in the ultimate in compatibility between the grease and the diffusion pump fluid since the base oil used in the grease is the same as that being used as a diffusion pump fluid. For other o ring applications, Santovac 5 fluid might be the product of choice. With regard to overall compatibility with the elastomers typically used for "o" rings, we are not aware of any for which the use of Santovac 5 fluid or grease would be a problem. Under certain circumstances, there can be some nominal swelling of the elastomer with the polyphenyl ethers, but in some instances, such swelling phenomena are actually desirable. In most instances, the polyphenyl ethers will cause less problems with o rings than will hydrocarbon greases generally (e.g. those from petroleum distillates).
Space Applications:
The Santovac 5 polyphenyl ether based products are used in many different space applications, in both lubricant and grease form.
High temperature applications:
Santovac 5GB vacuum grease is thermally stable to 450°C and for short time intervals, up to the range of 500°C. We know of no other vacuum grease that comes close in having this high of a service temperature. For higher temperatures one must resort to solid lubricants of one type or another.
Low temperature applications:
Considering that there are a lot of questions about low temperature applications for vacuum greases, we are ourselves surprised that there is not more information available relative to low temperature performance. We do know that at -80° C (-112° F), Santovac 5GB, will become a glassy solid, but will not crystallize. It is a monomolecular material rather than a polymer, such as the perfluoropolyethers and, therefore, the polyphenyl ether structure will definitely perform differently. Unfortunately we have no hard data available under these low temperature conditions.
As a result, we recommend that some tests be run to confirm that the Santovac 5GB performance will indeed live up to or exceed expectations before incorporating it into some production application or introduction into a complex system.
